We cannot begin assembly on your order until we receive sufficient additional components to account for attrition. Due to the small size of many parts and the high speed of automated placement equipment, a small number of components may be lost or damaged during setup and processing, as is common in electronics manufacturing.
If we do not receive the required extra parts, your order may be placed on hold while we contact you to resolve the shortage. This can result in delays to your assembly schedule.
If certain components are high in cost and meeting our standard attrition requirements would create a financial hardship, please notify your Customer Service Representative. Provide the part number and reference designator(s) so we can review and account for the shortage(s) appropriately.
To avoid unnecessary delays and ensure a successful build, please follow our Revised Attrition Standards and Conditions outlined below. If you have any questions, please contact our Customer Service Team via chat or email at sales@screamingcircuits.com.
0201, 0402, and 0404 Packages
- Provide an additional 20%, with a minimum of 50 extra parts
0603, 0805, 1206, and SOT-23/SOT-235 Packages
- Provide an additional 10%, with a minimum of 20 extra parts
Through-Hole and Mechanical Components
- Provide 2 extra parts
All Other Component Types:
Unit Cost: $1.00 or Less
- Provide an additional 5%, with a minimum of 4 extra parts
Unit Cost: $1.01 - $1.99
- 100 placements or fewer: Provide 5 extra parts
- 101 placements or more: Provide an additional 5%
Unit Cost: $2.00 - $3.99
- 60 placements or fewer: Provide 3 extra parts
- 61 placements or more: Provide an additional 5%
Unit Cost: $4.00 - $4.99
- 40 placements or fewer: Provide 2 extra parts
- 41 placements or more: Provide an additional 5%
Unit Cost: $5.00 or More
- Provide the exact quantity required for the build. No attrition quantity is required.
For more information about customer-supplied parts, please visit our FAQ page and the Materials Sourcing Solutions section.